Combination Hammer KHE 75
Metabo Productgroup - Rotary hammers/chipping hammers
Product features
More information:
Article number: 6.00275.42
- Suitable for bits and accessories with SDS-max shank end
- With the appropriate accessories, it is also suitable for bits and accessories with spline shank or ratio thread
- Rotation stop
- Metabo CODE! System: electronic anti-theft system, activated by CODE! key (accessory)
- Vario Tacho Constamatic (VTC) full-wave electronics
- Thumbwheel for preselection of speed
- Pneumatic high-performance hammer mechanism
- Magnesium die cast gear housing
- Dust seal protects from the finest dust particles
- Ergonomic housing design for fatigue-proof operation
- Rubber-coated handle
- Torque limiting clutch
- No-volt release switch
- Auto-stop carbon brushes
- Brush wear indicator
| Torque | 575 in-lbs |
|---|---|
| Drilling capacity in | |
| - Concrete with hammer drill bits | 1 3/4 " |
| - Concrete with router bits | 3 1/8 " |
| - Concrete with core bits | 3 15/16 " |
| - Masonry with core bits | 3 15/16 " |
| No load speed | 140 - 280 /min |
| Rated current | 10.5 A |
| Rated input power | 1150 W |
| Output power | 690 W |
| Rated load speed | 280 /min |
| Maximum impact rate | 2650 /min |
| Maximum single-blow energy | 10 J |
| Collar diameter | 2 1/4 " |
| Bit retainer | SDS-max |
| Weight (without mains cable) | 14.1 lbs |
- » Metabo products
- » Product catalouge
- » handheld
- » Rotary hammers/chipping hammers
- » Combination Hammer KHE 75